Mac terminal commands asterisk password#

NETMASK0 is the subnet mask of the network. There's tons of resources on the web about this). (we're not going into the basics of IP address schemes in this article. Usually, it's the '0' address for the network. Now that we've configured the network script for the interface configuration for ETH0, we must now make a route if this interface communicates with a Gateway to reach the Internet or another network.įor eth0, create a new file called route-eth0 with the following contents: ADDRESS0=192.168.2.0 NETMASK0=255.255.255.0 GATEWAY0=192.168.2.1ĪDDRESS0 is the network address. Once you've edited the configuration script to your liking, save and return to the command line. The ones we shall be concerned with are ONBOOT=yes (turn me on at boot), BOOTPROTO=none (don't use DHCP or anything), IPADDR, and NETMASK (you should know what these are by now) Don't worry about those, we won't go into the meaning of all of that because it's beyond the scope of this essay. This file could also include HWADDR (mac address of the interface) and UUID, which is another hardware address for the interface. Since we are working with eth0 in this example, we will use our favorite text editor to open the file named, ' ifcfg-eth0' and add/edit the following lines: DEVICE=eth0 TYPE=Ethernet ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=none IPADDR=192.168.2.39 NETMASK=255.255.255.0 ' cd' to the following location and view its contents with ' ls' /etc/sysconfig/network-scripts Now that you've identified an interface using the guide or the ethtool command above, you can now write or edit a configuration script. Edit the Network Script Config for the Interface In this example, we will be working with eth0. You can make the port flash for longer or shorter by changing the value of the number at the end of the command. This will make the activity LEDs on the ethernet port named eth0 flash on and off for 120 seconds. Sometimes the ports on these servers are not labelled, so you can click here to view a guide or use this standard Linux command for identifying a network port: ethtool -p eth0 120 Identify an Ethernet Interfaceīefore you set up an Ethernet port, you'll want to identify it.

AT Asterisk for Telos installations usually ship with the log in credentials shown by clicking here. We can guide you through this entire process.įirst, log into the Asterisk's Linux terminal using the credentials provided. Please use the Contact Us link above for more information on these options. By default, the process will display all processes by CPU usage, with the process id or PID displayed alongside each entry.We are also happy to provide advanced, dedicated support and training on a VX and FreePBX system through various paid TelosCare Service Level Agreement options, or a la carte via our Dedicated Remote and Onsite Support service. To see a list of currently running processes and how much CPU and memory they’re currently using, execute top. This is especially useful for printing a path that you can later copy and paste. To display the current directory that you’re in (or “print working directory”), you can use the pwd command. If you want to edit a system file, for example, you might need to use sudo nano in order to save your changes. Some commands require root access in order to work.

Mac terminal commands asterisk password#

Once you’ve entered a command prefixed by sudo, you’ll be required to enter your administrator password to execute it.

The sudo prefix is used to execute a command as a “super user,” also known as root or admin. To save a file, hit Control+O (known as “Write Out”) or quit without saving using Control+X. Once you’re in nano, pay attention to the commands at the bottom of the screen, which involve the control key. Use cp to initiate the copy command, add a flag where required, and then enter the target file or folder, followed by a space, and then add the destination folder. Remember, you can also use the same location shortcuts that you’d use with the cd command (e.g. For example, use -C to get a multi-column output, -S to sort by size, -lt to sort by date modified, -la for detailed contents including hidden files, or -lh to create a list with readable file sizes. You can add flags to the ls command to get different results. Append it with a location on the drive to specifically target that directory. List Files & Folders: lsĪlso useful in navigating your drive, ls can be used to list the contents of the current directory simply by executing the command. For example, running cd ~ will take you to the Home directory for the current user. You can also use cd/ to get to the root of the drive, cd. You can use shortcuts to quickly skip to certain directories.